Full Automatic 0.1-2L PET Bottle Blowing Machine
Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecti ng board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown i certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
Configuration:
1) PLC colour display: MITSUBISHI(JAPAN)
2) Pneumatic parts: FESTO(GERMANY)
3) Valve: FESTO (Germany)
4) Other electric parts are all world-famous brand
Technology Advantage
1. Special design,high rigid compound die structure
2. Wide adaptability, suitable for every type mould thickness
3. Adjust convenience
4. No mould rolling out
5. More energy conservation,no need much air supply
6. High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke,quick action
8. All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
9. Hig dead-weigh, ensure the steady during the opeartion
Technical Parameter:
| |
item |
V02LP |
Bottle type specification
|
cavity |
2 |
| theory output (PCS/HR) |
1800-2000bph |
| Max. volume (L) |
2L |
| Bottle mouth maximum overall diameter (mm) |
12-38mm |
| Bottle biggest diameter |
107mm |
| Bottle maximum height |
350mm |
Power specifications
|
Light tube quantity |
32pcs |
| Light tube power |
1.25kw |
| Maximum heating power |
24kw |
| All electric machine installation |
38kw |
| Actual consumption |
26kw |
Air pressure specification
|
Work pressure |
7-9kg/cm2 |
| Blow bottle pressure |
25-35kg/cm2 |
| Higher -pressure gas consumption |
1500 Ltr/min |
Frozen water specification
|
Work pressure |
5-6 kg/cm2 |
| Temperature range |
10°C |
| Consumption |
8000kcal/hr |
| Frozen water flow |
88Ltr/min |
| Machine specification |
Size of the machine |
5250*2164*2100mm |
| Weight of the machine |
4ton |
Pre-Service:
1. 24 hours on line anwser your question.
2. Take video as client's request.
3. Welcome to view our Factory.
After-Service:
1..We will provide the bill of load on time to make sure you can get the machine quickly
2.Engineers available to service machinery overseas
3.We provide useful documents with machine
4.1 Years guarantee
Customized service:
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
If you are interested in our machines,welcome to visit our factory!
Please Contact:Miss Lisa
Mob :+0086 15295570787
Web:veshinemachinery.en.made-in-china.com
Audited Supplier 
){kind=link}
){kind=link}