Hot Sale Pet Bottle Blowing Moulding Machinery
1. Flow chart of production:
Scrambler Lining the performs-- Preforms be loaded by transfer-- Heated by lamps
-- Blowing station(sealing-stretching-blowing)-- Bottles be delivered by transfer arm-- Finished goods.
2. Blowing Procedure:
(1) Loading preformsPreforms are put into the hopper and delivered to the scrambler by transfer belt. Lined preforms in the guiding rail will go into heating part automatically because of the gravity. So the whole process of scrambling preforms is accomplished automatically and with the features of high efficiency and low possibility of scratching preforms.
(2) Adjusting temperaturePreforms are put on the spindle by transfer arm and then continuously go through the heating zone, during this process preforms are rotating themselves so that it can be evenly heated. The heating zone is controlled by Siemens intelligent controller, so every layer of lamps can be controlled separately. The special design of neck protection device can prevent neck from being deformed. The temperature of every layer lamps is operated by human-computer interface, which is more convenient and intuitively.
(3) Stretching and blowingCylinder guiding rail structure accurately control the opening and closing of mold frame, so the mold frame structure is stable and easily to change molds. Special mold locking pressure increasing system; every blowing parameter can be adjusted by touch panel, can easily judge the breakdowns; special nozzle device guarantee the reliability of sealing even under all kinds of pressure, special blowing controlling way greatly improves the finished goods rate
(4) bottles be transferred out of equipmentAfter blowing, bottles will be catched by transfer arm in the spindle and then be delivered to the transferring belt, which guarantee the continuously bottle production, the bottles will be delivered to bottle tank finally.
3. Technical Specification :
| MODEL |
UNIT |
2L |
| CONTAINER |
Max.container volume |
L |
2 |
| Max. neck diameter |
mm |
37 |
| Max. container diameter |
mm |
180 |
| Max. container height |
mm |
340 |
| Number of cavities |
|
2 |
| Theoretical output |
BPH |
1600 |
| ELECTRICITY SYSTEM |
Installed power |
Kw |
92 |
| Max. heating power |
Kw |
28 |
| COMPRESSED AIR SYSTEM |
Operating pressure |
Mpa |
0.7 |
| Low pressure Air consuming |
M3/min |
1.5 |
| Blowing pressure |
Mpa |
4.0 |
| High pressure Air consuming |
M3/min |
2.5-3.2 |
| Use mould Booster |
|
Yes |
| CHILLED WATER |
Pressure |
Mpa |
26-30 |
| Temperature |
ºC |
10-12 |
| Flow rate |
L/min |
30 |
| MACHINE |
Size(L*W*H) |
mm |
5250*2164*2100 |
| Weight |
Kg |
4500 |
4.Feature of plastic bottle blowing machine:
1.Simplified operated by MMI control panel.
2.Applications :All Kinds of small PET bottles.
3.Modular design facilitates maintenance
4.Crank clanping structure, close and open mold more easily.
5.Blast-air heating and cooling more uniform structure type oven
6.Machine is very safety stabilization and no waste.
6.Welcome to our factory!
Please Contact:
Contact: Miss jenny
Phone+86 13773294116
Audited Supplier 
){kind=link}
){kind=link}